Type II — decorative anodize
Type II builds a 5-25 micrometer aluminum oxide layer over the base metal. The layer is porous (think tiny vertical tubes) which means it accepts dye in any color — black, red, blue, gold, custom Pantone. After dyeing, the pores are sealed in hot water or nickel acetate to lock in the color. Result: a smooth, hard, corrosion-resistant decorative finish that looks premium and feels solid.
Use Type II for consumer electronics, optics housings, fixtures that need to look good, parts where color coding matters. Avoid for sliding wear surfaces — the layer is thin and will eventually wear through.
Type III — hardcoat anodize
Type III builds 25-75 micrometers (some specs go to 100), and the layer is denser. The result is roughly the hardness of mild steel — 60-70 HRC equivalent. Standard color is black or dark grey (the dense layer cannot accept dye well). Use it on sliding parts, gear teeth, engine components, anything that takes mechanical wear.
Trade-off: Type III adds noticeable thickness to your part. A 50 micrometer layer means dimensions grow ~25 micrometers per side. For tight-tolerance features, machine the part 25-50 micrometers undersize before anodizing.
What we tell customers
If your part lives in a drawer, on a desk, or inside an enclosure: Type II. If it slides against another part, gets dropped on concrete, or sees abrasive wear: Type III. If it is decorative AND wears: Type III in black, then accept the look. If you need both look and function in one finish: consider PVD coating instead, which gives Type-III-like wear resistance with chrome or gold colors.
Have a part in mind?
Send us your CAD — quote with detailed pricing and DFM feedback within 4 working hours. No forms, no signup.
From the blog
How tight is too tight? A real-world CNC tolerance guide for 2026
Specifying ±0.005 mm because "tighter is safer" can multiply your part cost by 5-10×. Here is what tolerance you actuall...
6061 vs 7075 aluminum: when paying 3× for 7075 actually pays back
7075-T6 has 80% higher yield than 6061-T6 and costs 3× more. Here is the practical decision tree we walk customers throu...
Where your $80,000 injection mold actually goes — a cost breakdown
Steel cost. Machining hours. Polish hours. Inserts. Trial shots. Where every dollar of mold tooling goes, with real shop...
Upload a CAD file. Get an engineering-reviewed quote in under 24 hours.
No minimum quantity. Free DFM feedback from a senior manufacturing engineer. NDA signed before file review on request.
Working on a live project? Send the STEP file and the two or three features you are unsure about — an engineer replies with DFM notes and a price, usually within four working hours.